Moving vehicles safety

As part of Farm Safety Week, we will be providing top tips on each daily theme.

For a more in depth guide, refer to the HSE’s website and keep up with the conversation using the hashtag #farmsafetyweek

 

Children on the Farm

1. Provide supervision and training

Children should be supervised while on the farm at all times and be made aware of any safety issues.

Older children working on the farm, should be given proper training and only carry out work they are fit to do and for shorter periods of time.

2. Prevent access to dangerous areas and height

Children should never be able to access height or dangerous areas of the farm such as open water tanks, wells, slurry tanks and ditches. All of these areas should be securely fenced, locked and inaccessible to children.

3. Keep children away from machinery and vehicles

Machinery and vehicles should also be kept well away from children.

Children under the age of 13 must not drive, operate or ride as a passenger on tractors, ATS’s or other farm machinery.

Older children are allowed to drive and operate vehicles but must receive full training and wear a seatbelt at all times.

See tips on staying safe around machinery and moving vehicles.

4. Keep children at a safe distance from livestock

Children should never be left unsupervised around livestock and should be kept at a safe distance, on the other side of a fence or gate.

Keep children away from bulls, stallions, rams, stags and female animals with new-born young as well as any animal known to become easily distressed.

See tips on staying safe around livestock below.

5. Keep chemicals and tools properly stored, locked away and out of reach

Chemicals, tools and equipment must be completely inaccessible to children.

6. Have a dedicated safe play area for younger children

In addition to fencing off dangerous areas, you should create a cornered off, dedicated safe area for younger children to play in. The area must be in full view of the dwelling house or adult supervision and be completely free of hazards.

Moving Vehicles

1. Keep vehicles well maintained

Vehicles should be inspected daily before use and any repairs carried out immediately. Some things to look out for include:

  • Mirrors are properly fitted and kept clean
  • All parts are in good condition and properly fitted
  • Tires are in working condition
  • Brakes are in full working order

2. Ensure drivers are fit to drive

All drivers should be trained and authorised to drive a vehicle before operating it on their own. You must ensure that all drivers are medically fit to drive, and are able to take breaks to avoid fatigue.

3. Practice Safe Stop procedures

If you are stopping or exiting a vehicle you must follow these safe stop procedures:

  • Put the handbrake on
  • Make sure the controls are in neutral
  • Stop the engine (or turn off power)
  • Remove the key (or lock-off the power supply)

4. Ensure site and driving routes are safe

Regular driving sites and routes should be regularly maintained. Routes need to be kept clear and obstructions removed immediately.

Routes should also be well lit and warning and speed signs must be visible, clear and consistent with the Highway Code.

5. Ensure non-drivers’ safety is maintained

The safety of livestock and individuals is just as important as the driver’s. Therefore, vehicle routes should be kept away from populated areas where possible.

Routes should avoid the need to reverse and all vehicles must be fitted with audible reversing alerts.

When a non-driver needs to approach a vehicle, they must first attract the driver’s attention and ensure that they have stopped before moving closer.

6. Wear high visibility clothing

For those working nearby moving vehicles, high visibility clothing is important so that you are as visible to the driver as possible. This may be particularly important when working in the dark and in weather conditions such as fog and rain.

Handling Livestock

1. Provide staff training

All handlers must be fully trained and competent to handle livestock. Training can be provided by an experience colleague and new staff should be supervised for a period of time following training.

2. Understand animal behaviour and stress triggers

Animals respond well to routine and are easily startled by sudden movement, loud sounds and bright lights. Make sure you are calm and deliberate when working with livestock and approach animals from the front. Never turn your back on cattle and avoid shouting at, beating or using electric goads. Your animals will remember bad experiences.

3. Provide and maintain proper facilities and equipment

Providing restraining and handling equipment is extremely important when handling livestock for routine tasks. When dealing with larger animals, equipment such as halters, bull poles and pig boards should be used.

Animals must also be properly contained and unable to move during treatments. Shedding gates, races and crushes should be used, secured and properly maintained.

If an animal is likely to kick, leg restraints should also be used.

4. Wear personal protective equipment

Work shoes or boots should always be worn when working with livestock to prevent crushing. Non-skid soles can always be useful to prevent slips.

Wearing gloves is also necessary to protect hands from chemicals, faeces or disease from spreading.

You may also want to consider other equipment such as dust masks.

5. Leave a clear exit path

Many injuries are caused by startled animals pinning their handler to a surface. Ensure you have enough space to work in and have a clear exit path if the animal shows sign of distress.

6. Follow strict hygiene procedures

To avoid spreading disease, you must follow strict hygiene procedures when handling livestock and disposing of animal waste. If a disease outbreak occurs, you must report the incident to the proper authorities and strictly follow their instructions.

Operating Machinery

1. Provide Staff Training

All operators, whether a full time employee or casual or seasonal worker, must be fully trained on how to operate any machinery they are required to use as part of their job.

Relevant training for machines can be given by experienced colleagues or through an external training provider.

You should also ensure that all operators have read and understand any machine manuals and have them on hand at all times for reference.

2. Safeguard your machines

Safeguards should be provided by the supplier and properly fitted to the machine to prevent access to dangerous parts.

Safeguards refer to:

      • Guards
      • Interlocks
      • Two-hand controls
      • Light guards
      • Pressure sensitive matts etc.

3. Regularly inspect and maintain machines

Thorough inspections of the machine should be carried out on a set, regular basis. Some things you will need to look out for are;

      • Mechanical defects
      • Blockages and leaks
      • Correct fitting of all parts
      • Condition of all parts
      • Cleanliness of windows and mirrors

Pay particular attention to brakes, wheels, tires, guards and stop devices e.g. emergency stops.

4. Dress appropriately when operating

When operating any type of machinery, ensure clothing is snag free and all laces, hair, jewellery and loose material (even loose threads!) are properly tied or removed.

In some cases, PPE may be necessary such as safety glasses, hearing protection and safety shoes.

5. Stay vigilant and focused

Always be aware of your surroundings when operating machines and ensure you are confident in triggering an emergency stop.

Ensure you are well rested and are taking breaks when needed. Fatigue can be extremely dangerous when operating machinery.

6. Ensure machines are properly shut down, isolated and locked when not in use

Proper shutting down of machinery should be carried out before leaving the drivers seat and before anyone carries out any maintenance or adjustments.

Many serious and fatal accidents have occurred when operators have tried to fix a problem or clear the area around a machine, without properly shutting it down.

If you are exiting the machine or are carrying out any maintenance or adjustments, follow safe stop procedures to prevent accidental injury:

      • Put the handbrake on.
      • Make sure the controls are in neutral.
      • Stop the engine.
      • Remove the key (or lock-off the power supply).

 

4 Comments

  1. Zequek Estrada

    The added detailed bulleted points under some of the sections of Operating Machinery was pretty educational. There is a lot that needs to be remembered to make sure that proper safety is maintained. I would imagine that it’s a good idea for skilled workers to review these six items concerning machinery.

  2. Auburnmachinery

    Hire a Machinery Moving Company is a task . Find a company that offers a wide range of machinery from reputable manufacturers. You want to be sure that the company not only has the items you need, but that they are well-built and safe to use.

  3. Tiffany Locke

    Making sure that the drivers of the equipment are medically fit to drive and are able to take breaks seems like a very important way to stay safe. Whenever you operate any larger equipment making sure you are able to physically and mentally handle it helps keep everyone safe. I would imagine that you would want to make sure they have the training necessary to drive the equipment is very important as well.

  4. jresquival

    That’s a good piece of advice to avoid loose clothing. You don’t want to get snagged into a moving part. Machines won’t stop just because you’re in a rough spot.

Leave a Reply

Your email address will not be published. Required fields are marked *